Data sanitization, matched to the media.
Hard drives and SSDs are sanitized or physically destroyed according to your requirements. Every result is verified, and a device that fails is handled as an exception, not reported as sanitized.
Two different things
Logical sanitization and physical destruction are not the same.
RTR keeps them distinct in scoping, in processing and in reports, so you always know which one was applied to each device.
Data is removed; the device can be reused.
Software or device commands overwrite or erase the storage so the device remains usable. It depends on the device supporting the method, and the result must be verified. Where a drive cannot be sanitized logically, it moves to the exception path.
The media is destroyed; the device is not reused.
The drive is physically destroyed so the data cannot be recovered and the media cannot be returned to service. Destruction is used where your policy requires it, where the media is damaged, or where logical sanitization is not possible. Method and result are agreed per media type.
Media and approach
What RTR sanitizes, and how it decides.
Hard disk drives
Solid-state drives
Other media
Verification
Every attempt is checked. Failures are not hidden.
- 01
Identify
Each data-bearing device is identified and tracked from receipt.
- 02
Apply
The agreed method is applied: logical sanitization or physical destruction.
- 03
Verify
The result is checked against the method’s own status and any further verification in your scope.
- 04
Handle exceptions
A drive that fails, cannot be read or cannot be verified is flagged and handled as agreed, usually by destruction.
- 05
Record
The outcome for each device is recorded in the project documentation.
- 06
Report
Results are delivered in the agreed format, with exceptions listed.
A failed sanitization is never reported as a success. It appears in your report as an exception, with what was done about it.
Sample · fictional data. Download the sample (PDF)
Reporting
Per-device results, in a document you can file.
The certificate of data sanitization lists the result for each device. Where a project calls for it, results sit alongside the serialized asset report and the chain-of-custody record.
The sample uses fictional data to show the format. Wording and fields are agreed per project.
Standards
Aligned with NIST SP 800-88 Rev. 2.
NIST Special Publication 800-88 Revision 2, Guidelines for Media Sanitization, was finalized in September 2025. It describes three sanitization categories, Clear, Purge and Destroy, and how to verify and validate the result.
RTR follows this guidance and uses its categories to describe sanitization in scopes and reports. The publication is guidance, not a certification; RTR’s certifications are R2v3 and RIOS. Which technique applies to which of your devices is agreed in your scope. How the categories work
Tell us what media you need handled.
Media types, quantities and the standard your policy requires are enough to scope the work.